Enquiry now
banner

Product Range

Super Flexible Foam Dielectric Copper Feeder Cable 1/2″

Model: (1/2″ SF Cu) KCPL50FR12A4


Specifications

Construction
Inner Conductor Copper-Clad Aluminum Nominal 3.60+0.10 mm
Dielectric Foamed polyethylene Nominal 9.80+0.30 mm
Outer Conductor Corrugated copper tube Nominal 12.00+0.20 mm
Jacket Flame-Retardant/Halogen-Free black PE Nominal 13.40+0.15 mm

Mechanical Characteristics
Weight (+5%) F-R Jacket Nominal 0.20 kg/m
Minimum Bending Radius (single) 32 mm
Minimum Bending Radius (repeated) 64 mm
Number of bends, minimum (typical) 15
Bending moment 2.7 Nm
Flat Plate Crush Resistance 1.7 kg/mm
Operating Temperature F-R Jacket -40℃~+80℃
Installation Temperature -20 °C to +60°C
Storage Temperature -70°C to +85°C
Max. Pulling Force 65 kg

Electrical Characteristics
Max. Operating Frequency 10.0 GHz
DC Resistance Inner Conductor 2.97 Ω/km
Outer Conductor 5.15 Ω/km
Dielectric Strength DC 25,00V For 1 Min
Min. Insulation Resistance 10,000 MΩ.km
Velocity of Propagation 81+3%
Peak Power Rating 15.6 kW
Characteristic Impedance 50+1Ω
Capacitance 80 pF/m
Inductance 0.195 µH/m
Cut-off Frequency 13.0 GHz
Jacket Spark Test Voltage 5000 Vrms
VSWR 800~1000 MHz 1.15
1700~2200 MHz 1.15
2200~2700 MHz 1.20

Frequency (MHz) Attenuation dB/100m
100 3.63
150 4.50
200 5.02
300 6.35
450 7.29
500 9.23
700 8.60
824 10.10
890 10.50
900 10.68
960 11.00
1000 12.20
1500 14.90
1700 15.00
1800 15.50
1900 16.10
2000 16.40
2100 17.00
2200 17.12
2300 17.75
2400 18.02
2500 18.60
2700 19.45
3000 20.70

  • *The attenuation may rise by 0.2%/ ℃ with rising temperature.
  • *Maximum attenuation value shall not exceed 110% of nominal value.
  • *Characteristic Impedance is the average value at the frequency range of 30 ~ 2400 MHz.
  • *The above electrical figures should be guaranteed on condition that the cable is well fitted with our supplied connectors for good electrical matching at the cable length 100M.

Contact Kanhha Cables for your return loss specification of your required frequency band.

Client testimonial

Testimonial
Mr. Ovijeet Das
Overseas Infrastructures Alliance (OIA) India Pvt. Ltd.

“After the delivery of the cables against one of our RURAL ELECTRIFICATION (RE) project in Mozambique, TIRUPATI PLASTOMATICS TEAM was very apt in rendering the on-site training support related to installation aspects to our staff people which is exemplary and made our task lot more easier. We appreciate their POST SALES SUPPORT which was not a part of our contract agreement.”

Testimonial
Mr. I.P. Sharma
IRCON International Limited

“QUALITY is of paramount importance to our company and we are quite satisfied with the on-field performance of TIRUPATI PLASTOMATICS cables installed in our project”

Testimonial
Mr. Bharat Kulkarni
Hitachi Rail STS

“During the Pre-shipment inspection, we realized that the quality of workmanship of TIRUPATI PLASTOMATICS make cables is of highest quality. Their labs are fully equipped to perform all the ACCEPTANCE TESTS which were desired from our side. We would come back for the repeat purchase of the similar cables”

Testimonial
Ms. Nirmal
Delhi Metro Rail Corporation (DMRC

“Our Experience of buying the cables for our Metro Project had been very satisfying as they are operationally performing well in line with our desired standards. We vouch for the technical prowess of TIRUPATI PLASTOMATICS make cables.”

Dedicated Customer Terms & An Agile Service

Our worldwide presence ensures the timeliness, cost efficiency and compliance adherence required to ensure your production timelines are met.

Download Brochures
Kanhha Cable

Request a Quote

Complete control over products allows us to ensure our customer receive the best quality price and service. we take great pride in everything that we do in our factory.