Enquiry now
banner

Product Range

Super Flexible Foam Dielectric Copper Feeder Cable 1/2″

Model: (1/2″ SF CU) KCPL50PE12A1A

 

Specifications

Construction
Inner Conductor Copper Clad aluminum Wire 3.60+0.10 mm
Dielectric Foamed polyethylene Nominal 9.80+0.30 mm
Outer Conductor Corrugated Copper tube Nominal 12.00+0.20 mm
Jacket Standard black PE Nominal 13.40+0.15 mm
Mechanical Characteristics
Weight (+5%) Standard Jacket Nominal 0.18 kg/m
Minimum Bending Radius (Single) 25 mm
Minimum Bending Radius (Repeated) 50 mm
       Bending Moment at 90° 4.4
Flat Plate Crush Resistance 1.70 kg/mm
Tensile strength 700N
Environmental Specification
 

 

 

Operating Temperature

  

 

Standard Jacket

        -55℃~+85℃
 

 

 

Installation Temperature

        -25℃~+60℃
 

 

 

Storage Temperature

        -70℃~+85℃
       Standard Condition
Attenuation Ambient Temperature 20℃
Average Power, Ambient Temperature 40℃
Average Power, inner Counductor Temperature 100℃


Electrical Characteristics
 

DC Resistance

 Inner Conductor 2.90 Ω/km
Outer Conductor 3.67 Ω/km
Test Voltage 1.27KvRMS
Min. Insulation Resistance 10,000 MΩ.km
Screening effectiveness ˃1.20db
Velocity of Propagation 81+3%
Peak Power Rating 16 kW
Characteristic Impedance 50+1Ω
Operating Voltage 1.27KV RMS
Capacitance 78 pF/m
 

Return Loss

 800~2200 MHz ≤ -27 dB
2200~3000 MHz ≤ -26 dB
3000~3800 MHz ≤ -24 dB
PIM -160 dBc

Frequency (MHz) Attenuation dB/100m Average Power (kW)
30 1.77 5.58
80 2.92 3.38
150 4.03 2.45
450 7.15 1.38
824 9.86 1.00
900 10.34 0.95
960 10.71 0.92
1000 10.95 0.90
1500 13.65 0.72
1700 14.62 0.67
1800 15.09 0.65
1900 15.55 0.63
2000 16.00 0.61
2200 16.87 0.58
2500 18.12 0.54
2700 19.00 0.51
3000 20.12 0.49
3300 21.20 0.47
3400 21.56 0.46
3500 21.92 0.45
3600 22.28 0.43
3800 22.98 0.41

  • The attenuation may rise by 0.2%/ ℃ with rising temperature.
  • *Maximum attenuation value shall not exceed 105% of nominal value.
  • *Characteristic Impedance is the average value at the frequency range of 30 ~ 2400 MHz
  • *The above electrical figures should be guaranteed on condition that the cable is well fitted with our supplied connectors for good electrical matching at the cable length 100M.

Contact Kanhha Cables for your specification of your required frequency band.

Client testimonial

Testimonial
Mr. Ovijeet Das
Overseas Infrastructures Alliance (OIA) India Pvt. Ltd.

“After the delivery of the cables against one of our RURAL ELECTRIFICATION (RE) project in Mozambique, TIRUPATI PLASTOMATICS TEAM was very apt in rendering the on-site training support related to installation aspects to our staff people which is exemplary and made our task lot more easier. We appreciate their POST SALES SUPPORT which was not a part of our contract agreement.”

Testimonial
Mr. I.P. Sharma
IRCON International Limited

“QUALITY is of paramount importance to our company and we are quite satisfied with the on-field performance of TIRUPATI PLASTOMATICS cables installed in our project”

Testimonial
Mr. Bharat Kulkarni
Hitachi Rail STS

“During the Pre-shipment inspection, we realized that the quality of workmanship of TIRUPATI PLASTOMATICS make cables is of highest quality. Their labs are fully equipped to perform all the ACCEPTANCE TESTS which were desired from our side. We would come back for the repeat purchase of the similar cables”

Testimonial
Ms. Nirmal
Delhi Metro Rail Corporation (DMRC

“Our Experience of buying the cables for our Metro Project had been very satisfying as they are operationally performing well in line with our desired standards. We vouch for the technical prowess of TIRUPATI PLASTOMATICS make cables.”

Dedicated Customer Terms & An Agile Service

Our worldwide presence ensures the timeliness, cost efficiency and compliance adherence required to ensure your production timelines are met.

Download Brochures
Kanhha Cable

Request a Quote

Complete control over products allows us to ensure our customer receive the best quality price and service. we take great pride in everything that we do in our factory.