RF JUMPER STRAIGHT (1/2″S)
D-CLASS LSF2-50 SureFlex® Jumper with interface types 1-2 DIN Male and 1-2 DIN Male, variable lengthQuick View
Product Range
| Jumper Type | DIN(M)-DIN(M) | DIN(M)-DIN(F) | DIN(M)-N(M) | DIN(M)-N(F) | N(M)-N(M) | N(M)-N(F) | DIN(F)-N(M) | DIN(F)-N(F) |
|---|---|---|---|---|---|---|---|---|
| Model | SA12JDMDM | SA12JDMDF | SA12JDMNM | SA12JDMNF | SA12JNMNM | SA12JNMNF | SA12JDFNM | SA12JDFNF |
Specifications
| ELECTRICAL DATA | |
|---|---|
| Impedance | 50±1 Ω |
| Frequency | DC-2.2GHz |
| Relative Velocity of Propagation | 81% |
| Return Loss | ≤-28 dB 800 – 1000 MHz ≤-26 dB 1700-2200 MHz |
| Insertion Loss | ≤0.10dB/m (cable) +0.1 dB (2 connectors) 900MHz≤0.15dB/m (cable) +0.1 dB (2 connectors) 1800MHz≤0.16 dB/m (cable) +0.1dB (2 connectors) 2200 MHz |
| Peak Power Rating | 16 KW |
| DC breakdown Voltage | 2500 V |
| Power Handling(at 20°C, Sea Level,VSWR 1.0) | 800W@1 GHz 500W@2 GHz |
| Insulation Resistance | ≥ 10 GΩ-Km |
| Intermodulation (3rd order) | ≤ -117 dBm |
| Intermodulation Test Method | Two +43 dBm Carriers |
| Standard Conditions |
|---|
| For attenuation, VSWR 1.0 , ambient temperature 20 °C |
| For Average Power, VSWR 1.0 , ambient temperature 40 °C |
| Inner conductor temperature 100 °C, no solar loading |
| Interface | |
|---|---|
| According to | IEC 60169-4, VG 95250, EN 122190, DIN 47223 (DIN 7/16) IEC 60169-16, MIL-PRF-39012, CECC22210 (N) |
| Mechanical Data | |
|---|---|
| Min. bending radius,single | 25 mm |
| Min. bending radius, repeated | 35 mm |
| Mechanical Data | ||
|---|---|---|
| Cable | Inner conductor Dielectric Outer conductor Jacket option |
Copper clad aluminium wire Highly foamed polyethylene Spiral corrugated copper tube PE/FRNC |
| Connector | Center contact Insulator Outer contact Gasket |
Brass/Silver-plated PTFE Brass/Alloy-Plated Silicone Rubber |
| Environmental Data | |
|---|---|
| Operation temperature | -45°C ~ 85°C |
| Vibration | MIL-STD-202, Meth.204,Cond.B |
| Shock | MIL-STD-202, Meth.213,Cond.B |
| Corrosion | MIL-STD-202, Meth.101 |
| Degree of Protection (mated pair) |
IP67 |
| RoHS | Compliant |
Client testimonial
Mr. Ovijeet Das
Overseas Infrastructures Alliance (OIA) India Pvt. Ltd.
“After the delivery of the cables against one of our RURAL ELECTRIFICATION (RE) project in Mozambique, TIRUPATI PLASTOMATICS TEAM was very apt in rendering the on-site training support related to installation aspects to our staff people which is exemplary and made our task lot more easier. We appreciate their POST SALES SUPPORT which was not a part of our contract agreement.”
Mr. I.P. Sharma
IRCON International Limited
“QUALITY is of paramount importance to our company and we are quite satisfied with the on-field performance of TIRUPATI PLASTOMATICS cables installed in our project”
Mr. Bharat Kulkarni
Hitachi Rail STS
“During the Pre-shipment inspection, we realized that the quality of workmanship of TIRUPATI PLASTOMATICS make cables is of highest quality. Their labs are fully equipped to perform all the ACCEPTANCE TESTS which were desired from our side. We would come back for the repeat purchase of the similar cables”
Ms. Nirmal
Delhi Metro Rail Corporation (DMRC
“Our Experience of buying the cables for our Metro Project had been very satisfying as they are operationally performing well in line with our desired standards. We vouch for the technical prowess of TIRUPATI PLASTOMATICS make cables.”
Dedicated Customer Terms & An Agile Service
Our worldwide presence ensures the timeliness, cost efficiency and compliance adherence required to ensure your production timelines are met.
Download Brochures
Kanhha CableRequest a Quote
Complete control over products allows us to ensure our customer receive the best quality price and service. we take great pride in everything that we do in our factory.