RF connector is an electrical connector designed to work at radio frequencies in the multi-megahertz range. RF connectors are typically used with RF cables and are designed to maintain the shielding that the RF design offers. Straight and Right Angle connectors available in N type and Din type for various sizes
| Model Type | SA 158 CNM | SA 158 CNF | SA 114 CNM | SA 114 CNF | SA 078 CNM | SA 078 CNF | SA 012 CNM | SA 012 CNF |
|---|---|---|---|---|---|---|---|---|
| Connector Size | 1 5/8″ Male | 1 5/8″ Female | 1 1/4″ Male | 1 1/4″ Female | 7/8′ Male | 7/8′ Female | 1/2″ Male | 1/2″ Female |
| VSWR | ≤1.1 (0~2.2GHz) | ≤1.1 (0~2.2GHz) | ≤1.1 (0~2.2GHz) | ≤1.1 (0~2.2GHz) | ≤1.1 (0~3GHz) | ≤1.1 (0~3GHz) | ≤1.1 (0~3GHz) | ≤1.1 (0~3GHz) |
| Suitable Cables | Kanha 1 5/8″ | Kanha 1 5/8″ | Kanha 1 1/4″ | Kanha 1 1/4″ | Kanha 7/8″ | Kanha 7/8″ | Kanha 1/2″ | Kanha 1/2″ |
| Packing | 1Pc in box | 1Pc in box | 1Pc in box | 1Pc in box | 1Pc in box | 1Pc in box | 1Pc in box | 1Pc in box |
| ELECTRICAL DATA | |
|---|---|
| Impedance | 50 Ω |
| Frequency | DC-11GHz |
| Insertion Loss | ≤0.05dB |
| Center Contact Resistance | ≤1mΩ |
| Outer Contact Resistance | ≤0.25mΩ |
| Insultation resistance | ≥5000MΩ |
| Withstanding Voltage AC (v/min) | ≥2500V |
| Power Handling | 1000W@10GHz 700W@24GHz |
| RF Leakage | 128dB@1GHz |
| Intermodulation (3rd order) | ≤-160dBc@2x20W |
| Retention for all female Connectors | ≥0.56 N |
| Mechanical Data | |
|---|---|
| Mating cycles | min. 500 |
| Coupling torque (recommended) | 0.7 Nm to 1.1 Nm |
| Proof torque | max. 1.7 Nm |
| Interface | |
|---|---|
| According to | IEC 60169-16, MIL-PRF-39012, CECC22210 |
| Environmental Data | |
|---|---|
| Temperature Range | -40~+850C |
| Relative Moisture | 90%~95%, Temprature: 40±20C |
| Water Proof | IP67 |
| Corrosion | MIL-STD-202, Meth.101,Cond.B |
| Vibration | MIL-STD-202, Meth.204,Cond.B |
| Damp Heat | MIL-STD-202, Meth.213,Cond.I |
| Climate Test | MIL-STD-202, Meth.106 |
| Material Plating | ||
|---|---|---|
| Connector Part | Material | Plating |
| Shell | Brass | Alloy |
| Center Contact | Brass | Silver |
| Back Nut | Brass | Alloy |
| Clamp | Brass | Alloy |
| Sealing | Silicone rubber | |
| Insulator | PTFE (orTPX) | |
“After the delivery of the cables against one of our RURAL ELECTRIFICATION (RE) project in Mozambique, TIRUPATI PLASTOMATICS TEAM was very apt in rendering the on-site training support related to installation aspects to our staff people which is exemplary and made our task lot more easier. We appreciate their POST SALES SUPPORT which was not a part of our contract agreement.”
“QUALITY is of paramount importance to our company and we are quite satisfied with the on-field performance of TIRUPATI PLASTOMATICS cables installed in our project”
“During the Pre-shipment inspection, we realized that the quality of workmanship of TIRUPATI PLASTOMATICS make cables is of highest quality. Their labs are fully equipped to perform all the ACCEPTANCE TESTS which were desired from our side. We would come back for the repeat purchase of the similar cables”
“Our Experience of buying the cables for our Metro Project had been very satisfying as they are operationally performing well in line with our desired standards. We vouch for the technical prowess of TIRUPATI PLASTOMATICS make cables.”
Our worldwide presence ensures the timeliness, cost efficiency and compliance adherence required to ensure your production timelines are met.
Complete control over products allows us to ensure our customer receive the best quality price and service. we take great pride in everything that we do in our factory.
