Flexible Foam Dielectric LEAKY Feeder Cable 7/8″
Model:(7/8″F Leaky Cable) KCPL50FR78A1S
Product Range
Specifications
| Construction | |
|---|---|
| Inner Conductor | Smooth copper tube Nominal 9.50+0.20 mm |
| Dielectric | Foamed polyethylene Nominal 23.20+0.50 mm |
| Outer Conductor | Overlapped copper foil with punched leaky slots 23.40+0.50 mm |
| Jacket | Flame-Retardant/Halogen-Free black PE Nominal 27.40+0.50 mm |
| Mechanical Characteristics | ||
|---|---|---|
| Weight (+5%) | F-R Jacket | Nominal 0.42 kg/m |
| Single Bending Radius | 250 mm | |
| Repeated Bending Radius | 300 mm | |
| Number Of Bends | 15 | |
| Tensile Strength | 1300N | |
| Operating Temperature | F-R Jacket | -40℃~+80℃ |
| Installation Temperature | -40℃~+80℃ | |
| Storage Temperature | -40℃~+80℃ | |
| Electrical Characteristics | ||
|---|---|---|
| DC Resistance | Inner Conductor | 1.50 Ω/km |
| Outer Conductor | 3.50 Ω/km | |
| Dielectric Strength | DC 10,000V For 1 Min | |
| Min. Insulation Resistance | 5,000 MΩ.km | |
| Velocity of Propagation | 89+2% | |
| Peak Power Rating | 91 kW | |
| Characteristic Impedance | 50±2Ω | |
| Capacitance | 76 pF/m | |
| Jacket Spark Test Voltage | 8000 Vrms | |
| VSWR | 790~960 | Max. 1.30 |
| 1700~1900 | Max. 1.30 | |
| 1920~2025 | Max. 140 | |
| 2110~2200 | Max. 1.40 | |
| 2300~2500 | Max. 1.40 | |
| 2500~2600 | Max. 1.40 | |
| Frequency(MHz) | AttenuationdB/100m | CouplingLoss95% (2 MTR) |
|---|---|---|
| 700 | 4.3 | 85 |
| 800 | 4.4 | 80 |
| 900 | 4.6 | 80 |
| 1800 | 8.5 | 75 |
| 1900 | 10.0 | 73 |
| 2000 | 10.1 | 73 |
| 2400 | 13.9 | 73 |
| 2600 | 16.9 | 72 |
| 2700 | 18.7 | 72 |
- *Attenuation / Coupling Loss are nominal values.
- *The attenuation may rise by 0.2%/℃ with ambient temperature rising.
- *Maximum attenuation value shall not exceed 110% of nominal value.
- *Maximum coupling loss value shall not exceed “nominal value ± 5dB”.
Contact Kanhha Cables for your specification of your required frequency band.
Client testimonial
Mr. Ovijeet Das
Overseas Infrastructures Alliance (OIA) India Pvt. Ltd.
“After the delivery of the cables against one of our RURAL ELECTRIFICATION (RE) project in Mozambique, TIRUPATI PLASTOMATICS TEAM was very apt in rendering the on-site training support related to installation aspects to our staff people which is exemplary and made our task lot more easier. We appreciate their POST SALES SUPPORT which was not a part of our contract agreement.”
Mr. I.P. Sharma
IRCON International Limited
“QUALITY is of paramount importance to our company and we are quite satisfied with the on-field performance of TIRUPATI PLASTOMATICS cables installed in our project”
Mr. Bharat Kulkarni
Hitachi Rail STS
“During the Pre-shipment inspection, we realized that the quality of workmanship of TIRUPATI PLASTOMATICS make cables is of highest quality. Their labs are fully equipped to perform all the ACCEPTANCE TESTS which were desired from our side. We would come back for the repeat purchase of the similar cables”
Ms. Nirmal
Delhi Metro Rail Corporation (DMRC
“Our Experience of buying the cables for our Metro Project had been very satisfying as they are operationally performing well in line with our desired standards. We vouch for the technical prowess of TIRUPATI PLASTOMATICS make cables.”
Dedicated Customer Terms & An Agile Service
Our worldwide presence ensures the timeliness, cost efficiency and compliance adherence required to ensure your production timelines are met.
Download Brochures
Kanhha CableRequest a Quote
Complete control over products allows us to ensure our customer receive the best quality price and service. we take great pride in everything that we do in our factory.