RF FEEDER CABLE 1/2” FLEX
Attenuation values typical at 20°C ambient temperature and Average power at 40°C ambient temperature with Inner conductor temperature at 100°C
Attenuation values typical at 20°C ambient temperature and Average power at 40°C ambient temperature with Inner conductor temperature at 100°C
Mechanical Characteristics | ||
---|---|---|
Inner Conductor | Copper clad aluminium wire | 4.8 mm |
Dia over Dielectric | Foamed PE | 12.0 mm |
Dia over outer conductor | Corrugated copper tube | 13.7 mm |
Diameter over outer jacket | PE | 16 mm |
Cable weight | PE | 210 Kg/Km |
Tensile strength | 1200 N | |
Bending moment | 5 Nm | |
Flat plate crush strength | 20 N/mm | |
Min.bending radius single | 70 mm | |
Min.bending radius repeated | 120 mm | |
No.of bends, minimum(typical) | 15(50) | |
Recommended hanger spacing | 0.8 m | |
Installation temperature | -40°C~+60°C | |
Operating temperature | -55°C~+85°C | |
Storage temperature | -70°C~+85°C |
Electrical Characteristics | ||
---|---|---|
Impedance | 50±1 Ω | |
Relative Velocity of propagation | 88% | |
Capacitance (1KHz) | 76 pF/m | |
Maximum operating frequency | 8.8 GHz | |
Cut-off frequency | 10 GHz | |
Peak power | 40 KW | |
Inner conductor DC-Resistance |
≤1.65 Ω/Km | |
Outer conductor DC-Resistance |
≤2.60 Ω/Km | |
Inductance | 0.190 µH/m | |
DC breakdown voltage | 4000 V | |
Jacket spark voltage (rms) | 8000 V | |
Return loss (800~1000) MHz | ≥26 dB | VSWR ≤ 1.1 |
Return loss (1700~2200) MHz | ≥24 dB | VSWR ≤ 1.13 |
Insulation resistance | ≥10 GΩKm | |
Passive intermodulation | ≥160 dBc |
Attenuation & Average Power | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Frequency(MHz) | 100 | 450 | 800 | 900 | 1000 | 1800 | 1900 | 2100 | 2200 | 2300 | 2500 | 2700 | 3000 |
Attenuation typical (dB/100m) | 2.1 | 4.6 | 6.3 | 6.7 | 7.2 | 9.9 | 10.3 | 10.9 | 11.2 | 11.47 | 12 | 12.6 | 13.2 |
Average power (KW) | 3.92 | 1.76 | 1.28 | 1.19 | 1.12 | 0.81 | 0.78 | 0.74 | 0.72 | 0.70 | 0.66 | 0.63 | 0.59 |
“After the delivery of the cables against one of our RURAL ELECTRIFICATION (RE) project in Mozambique, TIRUPATI PLASTOMATICS TEAM was very apt in rendering the on-site training support related to installation aspects to our staff people which is exemplary and made our task lot more easier. We appreciate their POST SALES SUPPORT which was not a part of our contract agreement.”
“QUALITY is of paramount importance to our company and we are quite satisfied with the on-field performance of TIRUPATI PLASTOMATICS cables installed in our project”
“During the Pre-shipment inspection, we realized that the quality of workmanship of TIRUPATI PLASTOMATICS make cables is of highest quality. Their labs are fully equipped to perform all the ACCEPTANCE TESTS which were desired from our side. We would come back for the repeat purchase of the similar cables”
“Our Experience of buying the cables for our Metro Project had been very satisfying as they are operationally performing well in line with our desired standards. We vouch for the technical prowess of TIRUPATI PLASTOMATICS make cables.”
Our worldwide presence ensures the timeliness, cost efficiency and compliance adherence required to ensure your production timelines are met.
Complete control over products allows us to ensure our customer receive the best quality price and service. we take great pride in everything that we do in our factory.